Properties
Hollow Metal O-Ring
Post by Mohsen Alamdar, Sep 05, 2019.
metallic
SEALING CONCEPT
O-FLEX™ Metal O-Rings are designed to provide a sealing option
for high pressure/temperature applications that require minimal
spring back. The O-FLEX™ is made from high strength metal tubing that is coiled, cut and welded to size. It is available in standard
cross section increments of 1/32”. The O-FLEX™ seating load can be
adjusted to the application by varying the cross section and tubing
wall thickness. Typical applications include Performance Engines,
Plastic Extrusion/Molding, Military Specifications, Aerospace and
Chemical Processing
O-FLEX™ TYPES
Basic
The basic O-FLEX™ is designed for low to moderate pressure
applications as high pressure may collapse the exposed tubing
wall.
Self Energizing
The Self-Energizing O-FLEX™ is designed for high pressure applications. Small holes are drilled in the tubing wall exposed to
the system pressure. These holes create an energizing effect
by allowing the pressure to enter the O-FLEX™. As a result, the
pressure inside the seal increases with the system pressure and
minimizes the possibility of collapsing the exposed tubing wall.
Pressure Filled
The Pressure Filled O-FLEX™ is designed for Performance Engine
applications that require sealing at elevated pressure and temperature in a high cycling environment. The O-FLEX™ is filled with
an inert gas that increases in pressure proportional to increases
in system temperature. This results in an energizing effect that
partially offsets the loss of material strength in service.
TUBE 0.035 DIAMETER
Military Standard
MS 9141Gasket, metal O-ring, .035 tube x .006 wall, cres
MS 9371Gasket, metal O-ring, .035 tube x .006 wall, cres, silver plated
1. Ring shall be flat within B.
2. *Preferred sizes.
3. Material: Corrosion and heat resistant steel tubing
AMS 5570 or AMS 5576.
4. Finish weld flush with tube OD. Smooth blend within
.125 of Weld. Dimensions at blend shall not be more
than .003 below adjacent surfaces.
5. Finish: Silver plate AMS 2410 .0010-.0015 thick.
Dimensions to be met before plating. Contact points
permissible on ID of ring: (MS 9371 only)
6. Surface roughness: AS 291/ANSI B46.1
7. Manufacturing specification: AMS 7325
8. Identification: Mark MS part number and
manufacturer’s identification on container.
9. Dimensions in inches.
10. Do not use unassigned part numbers.
11. Contact Us at farafankasra@gmail.com for design requirements.
TUBE 0.062 DIAMETER
Military Standard
MS 9142Gasket, metal O-ring, .062 tube x .006 wall, cres
MS 9202Gasket, metal O-ring, .062 tube x .010 wall, cres
MS 9372Gasket, metal O-ring, .062 tube x .006 wall, cres, silver plated
MS 9373Gasket, metal O-ring, .062 tube x .010 wall, cres, silver plated
1. Ring shall be flat within B.
2. *Preferred sizes.
3. Material: Corrosion and heat resistant steel tubing
AMS 5570 or AMS 5576.
4. Finish weld flush with tube OD. Smooth blend within
.125 of Weld. Dimensions at blend shall not be more
than .004 below adjacent surfaces.
5. Finish: Silver plate AMS 2410 .0010-.0015 thick.
Dimensions to be met before plating. Contact points
permissible on ID of ring: (MS 9372, MS 9373 only)
6. Surface roughness: AS 291/ANSI B46.1
7. Manufacturing specification: AMS 7325
8. Identification: Mark MS part number and
manufacturer’s identification on container.
9. Dimensions in inches.
10. Do not use unassigned part numbers.
11. Contact Us at farafankasra@gmail.com for design requirements.
TUBE 0.094 DIAMETER
Military Standard
MS 9203Gasket, metal O-ring, .094 tube x .006 wall, cres
MS 9204Gasket, metal O-ring, .094 tube x .010 wall, cres
MS 9374Gasket, metal O-ring, .094 tube x .006 wall, cres, silver plated
MS 9375Gasket, metal O-ring, .094 tube x .010 wall, cres, silver plated
1. Ring shall be flat within B.
2. *Preferred sizes.
3. Material: Corrosion and heat resistant steel tubing
AMS 5570 or AMS 5576.
4. Finish weld flush with tube OD. Smooth blend within
.125 of Weld. Dimensions at blend shall not be more
than .004 below adjacent surfaces.
5. Finish: Silver plate AMS 2410 .0010-.0015 thick.
Dimensions to be met before plating. Contact points
permissible on ID of ring: (MS 9374, MS 9375 only)
6. Surface roughness: AS 291/ANSI B46.1
7. Manufacturing specification: AMS 7325
8. Identification: Mark MS part number and
manufacturer’s identification on container.
9. Dimensions in inches.
10. Do not use unassigned part numbers.
11. Contact Us at farafankasra@gmail.com for design requirements
TUBE 0.125 DIAMETER
Military Standard
MS 9205 Gasket, metal O-ring, .125 tube x .010 wall, cres
MS 9376 Gasket, metal O-ring, .125 tube x .010 wall, cres, silver plated
1. Ring shall be flat within B.
2. *Preferred sizes.
3. Material: Corrosion and heat resistant steel tubing
AMS 5570 or AMS 5576. Tube size .124-.127 dia.,
wall thick. .009-.011.
4. Finish weld flush with tube OD. Smooth blend within
.125 of Weld. Dimensions at blend shall not be more
than .004 below adjacent surfaces.
5. Finish: Silver plate AMS 2410 .0010-.0015 thick.
Dimensions to be met before plating. Contact points
permissible on ID of ring: (MS 9376 only)
6. Surface roughness: AS 291/ANSI B46.1
7. Manufacturing specification: AMS 7325
8. Identification: Mark MS part number and
manufacturer’s identification on container.
9. Dimensions in inches.
10. Do not use unassigned part numbers.
11. Contact Us at farafankasra@gmail.com for design requirements
Leave a Comment: